CEKOL TERMO W2 - Mesh Adhesive and Base Coat (White)

APPLICATION AND PROPERTIES

• CEKOL TERMO W2 is applied to embed the grid of the fiber glass to the thermal insulation made of mineral wool, inside and outside the facilities.
• It shows high adhesion to the surface and is resistant to scratches and cracks due to contained fibers.
• The mortar is an excellent grounding for precious plasters in the external facilities heating system of the external facilities walls – ETICS.

THE SURFACE PREPARATION

Before the grid is embedded, check the condition of the surface of the mineral wool boards; fill any inequalities and holes in points of connections assembly.

MORTAR PREPARATION

Pour the package contents to cold water in a ratio of 5 to 5.5 litres of water per 25 kg bag and mix thoroughly. The time of mortar application approx. 3 hours.

APPLICATION

Apply the mortar on the board surface with a thickness equal to approx. 3-4 mm, and then applied the grid straps to embed into a mortar layer. The grid must be fully embedded not to make its colour visible on the surface. Apply the appropriate corner strips and additional grid strips. Performance: grid embedding – 4 kg/m². The temperature of the performed works: from +5ºC to +25ºC.