BASE PREPARATION:
The base should be clean, compact, carrying and free of grease. Paints, loose sand and plaster particles and layers not bound with the base must be removed. Tiles to be glued do not need wetting, they should be dusted thoroughly.
Notes:
1) Strongly absorbable bases (gypsum, gas concrete) should be primed with the CEKOL GS-83 priming emulsion.
2) In the case of low quality (highly absorbable) tiles, the lower surface of tiles should be primed with the CEKOL DL-83 emulsion or a thin layer of the tile adhesive should be applied to it.
TECHNICAL DATA:
Initial adhesion: ≥ 1 N/mm2
Adhesion after thermal ageing: ≥ 1 N/mm2
Correction time: ≥ 10 minutes.
Pot life: about 3 hours.
Setting time for walking and pointing: about 48 hours at the temperature of 18oC.
Consumption: about 3.6 kg/m2 when float with 8 mm teeth is used
Layer thickness: 4 to 8mm
Work temperature: +10oC to +30oC
Product has the National Institute of Hygiene (PZH) Attestation.
PACKAGING:
Paper bags with PE lining – 5; 15 kg
STORAGE:
Store in original packages, in a dry compartment.
Shelf life up to 12 months.