Tile Adhesives And Mortars

Showing 1-14 of 14 item(s)

ATLAS - Grouting mortar for bricks grey (25kg)

Tile Adhesives And Mortars

ATLAS - Grouting Mortar For Stone & Bricks- Grey (25kg)

ATLAS PLASTERING MIX is manufactured as a dry mix of high quality cement binder, quartz fillers and improvers. High compressive strength: category CS II (1,5 ÷ 5,0 N/mm²). *Grout - Coverage: 4 sqm

K DASH - Grouting mortar for bricks white

Tile Adhesives And Mortars

K DASH - Grouting Mortar For Stone & Bricks- White (25kg)

K Dash Traditional Fine Mortar is manufactured to ISO 9001 and provides a cost-effective solution for dry dashing. *Grout - Coverage: 4 sqm

Sopro FF450 - Highly elastic tile adhesive grey

On sale!

Tile Adhesives And Mortars

SOPRO FF450 - Highly Elastic Tile Adhesive- Grey (22.5kg)

Highly flexible For walls and floors For indoor and outdoor use *Adhesive - Coverage: 5-5.5 sqm

SOPRO FF455 Highly elastic tile adhesive white

Tile Adhesives And Mortars

SOPRO FF455 - Highly Elastic Tile Adhesive- White (22.5kg)

Highly flexible For walls and floors For indoor and outdoor use *Adhesive - Coverage: 5-5.5 sqm

Cekol GS-83 Contact-quartz sand primer (5KG)

Building Supplies

CEKOL Quartz Sand Wall Primer (5KG)

CEKOL GS-83 CONTACT has been specially formulated for priming smooth surfaces, floors and prefabricated elements from prepared timber and concrete to reinforced concrete elements. CEKOL GS-83 CONTACT primer is to be applied in order to improve plaster adhesion to difficult surfaces. Suitable for both interior and exterior use. *Primer -Coverage: 10 sqm

CEKOL Q-2 MULTI Flexible...

Building Supplies

CEKOL Q-2 MULTI Flexible Gel Adhesive (Grey)

CEKOL Q-2 MULTI is a flexible cementitious adhesive (C), with normal setting (1) with reduced slip (T), C1T. Especially recommended for gres, ceramics, terracotta tiles, brick, concrete, cellular concrete, cementitious and cement-lime plaster, as well as plasterboards. Thanks to a unique formula, tiles can be applied from top to bottom. Recommended for...

CEKOL Q-3 MAX...

Building Supplies

CEKOL Q-3 MAX Fully-Flexible Fiber-Gel Adhesive (Grey)

CEKOL Q-3 MAX is a cementitious adhesive (C) with improved technical parameters (2), with reduced slip (T) and extended open time (E), C2TE . It is used for tiling gres, ceramics, stone and glass tiles, as well as mineral wool to concrete substrates, bricks, cellular concrete, expanded clay aggregates, plaster boards and blocks, drywalls, stable...

CEKOL Q-5 PRO Hybrid...

Building Supplies

CEKOL Q-5 PRO Hybrid Flexible Adhesive (White)

CEKOL Q-5 PRO is a cementitious adhesive (C) with improved technical parameters (2), with reduced slip (T) and extended open time (E), C2TE. The product is intended for tiling marble, granite, stone, and ceramic tiles to mineral substrates. The product is a flexible, frost- and water resistant adhesive for indoor and outdoor use. The product has superior...

CEKOL DL-80 Special Deep...

Building Supplies

CEKOL DL-80 Special Deep Penetrating Primer (5L)

CEKOL DL-80 is a water-soluble, deep penetrating emulsion which does not contain solvents and is used for priming absorbable, mineral surfaces before applying fillers, self-levelling floors or sticking on ceramic tiles.

CEKOL DL-80 Special Deep...

Building Supplies

CEKOL DL-80 Special Deep Penetrating Primer (1L)

CEKOL DL-80 is a water-soluble, deep penetrating emulsion which does not contain solvents and is used for priming absorbable, mineral surfaces before applying fillers, self-levelling floors or sticking on ceramic tiles.

CEKOL DL-80 Special Deep...

Building Supplies

CEKOL DL-80 Special Deep Penetrating Primer (10L)

CEKOL DL-80 is a water-soluble, deep penetrating emulsion which does not contain solvents and is used for priming absorbable, mineral surfaces before applying fillers, self-levelling floors or sticking on ceramic tiles.

CEKOL Q-4 PLUS Hydro-Gel...

Building Supplies

CEKOL Q-4 PLUS Hydro-Gel Flexible Adhesive

CEKOL Q-4 PLUS is a deformable (S1) cementitious adhesive (C) with improved technical parameters (2), with reduced slip (T) and extended open time (E), C2TES1. Thanks to its special hydrophobic additives, it is recommended especially for ceramic linings in swimming pools, fountains, balconies and terraces. It may also be used for ceramic, gres, stone and...

CEKOL Q-7 Express Fast Set...

On sale!

Tile Adhesives And Mortars

CEKOL Q-7 Express Fast Set 20kg

CEKOL Q-7 EXPRESS Fast setting time (about 4 hours) enables quick repair works is a cement-based adhesive (C) with improved technical parameters (2), fast setting (F) with reduced slump (T) and extended open time (E). Can be used to bond ceramic, stoneware and natural stone tiles to concrete, brick, aerated concrete, expanded concrete, LECA blocksCEKOL...

BDT Hybrid Sealant/Adhesive

Building Supplies

Hybrid Adhesive for Decorative Lamellas

All purpose adhesive with a high modulus of viscosity and high penetration capacity. One component adhesive does not react with the substrate, curing at room temperature, used for the installation of a high strength joint.

Building Supplies

Our website uses cookies. They ensure the proper functioning of the website. More details can be found in our Cookies Policy. You can change cookie settings in the preferences of your web browser.